CCQMH - M-LINE 361A-20R SOLDER
- MSDS: CCQMH
- Manufacturer: MEASUREMENTS GROUP INC
- Product Name: M-LINE 361A-20R SOLDER
- National Stock Number: 3439-00N074229
Product Identification
Product ID:M-LINE 361A-20R SOLDER
MSDS Date:08/24/1995
FSC:3439
NIIN:00N074229
MSDS Number: CCQMH
Responsible Party
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 919-365-3800
Preparer: R L FRIDLEY
Cage: 88952
Contractor
Telephone: 919-365-3800
Cage: 88952
Ingredients
TIN
CAS: 7440-31-5
RTECS: XP7320000
Fraction By Weight: 63%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3
LEAD (SARA 313) (CERCLA)
CAS: 7439-92-1
RTECS: OF7525000
Fraction By Weight: 36.65%
OSHA PEL SEE 1910.1025
ACGIH TLV: 0.15MG/M3 DUST
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
ANTIMONY (SARA 313) (CERCLA)
CAS: 7440-36-0
RTECS: CC4025000
Fraction By Weight: 0.35%
OSHA PEL 0.5 MG/M3
ACGIH TLV: 0.5 MG (SB)/M3
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ROSIN ACID; (ROSIN)
CAS: 8050-09-7
Fraction By Weight: <3%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHALATION:OVER-EXPOSURE TO LEAD
MAY LEAD TO CENTRAL NERVOUS SYSTEM DISORDERS CHARACTERIZED BY
DROWSINESS, SEIZURES, COMA AND DEATH. EXPOSURE OF THIS MAGNITUDE IS
UNLIKELY. INGESTION:NOT LIKELY TO OCCUR, BUT WOULD HAVE SIMILAR
EFFECTS AS INHALATION. LEAD APPEARS ON NAVY LISTING OF OCCUP CHEM
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:REPROD HAZARDS. SEEK CONSULTATION FROM
APPROP HLTH PROFESSIONALS CONCERNING LATEST HAZARD LIST INFO & SAFE
HNDLG & EXPOS INFO . REPEATED INHALATION OR INGESTION OF LEAD CAN
RESULT IN SY STEMIC POISONING.
Medical Cond Aggravated by Exposure:PRE-EXISTING CONDITIONS OR DISEASES
OF THE BLOOD AND BLOOD FORMING ORGANS, KIDNEYS, NERVES AND POSSIBLY
REPRODUCTIVE SYSTEM.
First Aid
First Aid:INHAL:REMOVE VICTIM FROM EXPOSURE TO FUMES. EYE:FOR BURNS,
FLUSH IMMEDIATELY WITH COOL WATER FOR AT LEAST 15 MINUTES. SKIN:FOR
BURNS, FLUSH IMMEDIATELY WITH COOL WATER. INGEST:IF THOUGHT TO BE
OVER-EX POSED, THE PERSON SHOULD HAVE A BLOOD-LEAD ANALYSIS DONE.
Fire Fighting
Extinguishing Media:APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:FLUX IN CORED SOLDER MAY IGNITE WHEN THE
SOLDER MELTS IN A FIRE.
Accidental Release
Spill Release Procedures:MELTED SOLDER WILL SOLIDIFY ON COOLING AND CAN
BE SCRAPED UP. USE CAUTION TO AVOID BREATHING FUMES IF A GAS TORCH
IS USED TO CUT UP LARGE PIECES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE AWAY FROM SOURCES OF SULFUR.
WASH HANDS AFTER HANDLING SOLDER CONTAINING LEAD. AVOID BREATHING
FUMES DURING SOLDERING.
Other Precautions:DO NOT PLACE FLUX CORED SOLDER INTO A HOT SOLDER POT
SINCE FLUX MAY IGNITE. USE OF STRONG ACID FLUXES MAY RESULT IN
LIBERATION OF TOXIC LEAD CHLORIDE FUMES.
Exposure Controls
Respiratory Protection:USUALLY NOT REQUIRED. WHEN VENTILATION IS NOT
SUFFICIENT TO REMOVE FUMES FROM THE BREATHING ZONE, A NIOSH
APPROVED CARTRIDGE TYPE RESPIRATOR SHOULD BE WORN.
Ventilation:LOCAL EXHAUST & MECHANICAL:KEEP BELOW TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:WASH HANDS THROUGHLY AFTER HANDLING SOLDER
CONTAINING LEAD AND BEFORE EATING, DRINKING OR SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Spec Gravity:>1 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER-GRAY METAL IN WIRE FORM.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACID, STRONG OXIDIZERS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:NO LEAD OR ANTIMONY ARE DETECTED IN
FUMES FROM SOLDERING BELOW 1000F (537C).
Disposal
Waste Disposal Methods:SOLDER CAN BE RECLAIMED. DISPOSAL SHOULD BE IN
ACCORDANCE WITH LOCAL, STATE, AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.